Enhanced Ultraviolet Photoresponse Characteristics of Indium Gallium Zinc Oxide Photo-Thin-Film Transistors Enabled by Surface Functionalization of Biomaterials for Real-Time Ultraviolet Monitoring.

Indium gallium zinc oxide (IGZO) is one of the most promising materials for diverse optoelectronic applications based on thin-film transistors (TFTs) including ultraviolet (UV) photodetectors. In particular, the monitoring of UV-A (320-400 nm) exposure is very useful for healthcare applications because it can be used to prevent various human skin and eye-related diseases. However, the relatively weak optical absorption in the UV-A range and the persistent photoconductivity (PPC) arising from the oxygen vacancy-related states of IGZO thin films limit efficient UV monitoring. In this paper, we report the enhancement of the UV photoresponse characteristics of IGZO photo-TFTs by the surface functionalization of biomolecules on an IGZO channel. The biomaterial/IGZO interface plays a crucial role in enhancing UV-A absorption and suppressing PPC under negative gate bias, resulting in not only increased photoresponsivity and specific detectivity but also a fast and repeatable UV photoresponse. In addition, turning off the device without external bias completely eliminates PPC due to the internal electric field induced by the surface functionalization of biomaterials. Such a volatile feature of PPC enables the fast and repeatable UV photoresponse. These results suggest the potential of IGZO photo-TFTs combined with biomaterials for real-time UV monitoring.

Photoluminescence Detection of Surface Oxidation Processes on InGaN/GaN Nanowire Arrays.

InGaN/GaN nanowire arrays (NWA) exhibit efficient photoluminescence (PL) in the green spectral range, which extends to temperatures well beyond 200 °C. Previous work has shown that their PL is effectively quenched when oxidizing gas species such as O2, NO2, and O3 abound in the ambient air. In the present work we extend our investigations to reducing gas species, in particular to alcohols and aliphatic hydrocarbons with C1 to C3 chain lengths. We find that these species give rise to an enhancing PL response which can only be observed when the NWAs are operated at elevated temperature and in reactive synthetic air backgrounds. Hardly any response can be observed when the NWAs are operated in inert N2 backgrounds, neither at room temperature nor at elevated temperature. We attribute such enhancing PL response to the removal of quenching oxygen and the formation of enhancing water adsorbates as hydrocarbons interact with oxygen species coadsorbed on the heated InGaN surfaces.

Nano-sized quaternary CuGa2In3S8 as an efficient photocatalyst for solar hydrogen production.

The synthesis of quaternary metal sulfide (QMS) nanocrystals is challenging because of the difficulty to control their stoichiometry and phase structure. Herein, quaternary CuGa2In3S8 photocatalysts with a primary particle size of ≈4 nm are synthesized using a facile hot-injection method by fine-tuning the sulfur source injection temperature and aging time. Characterization of the samples reveals that quaternary CuGa2In3S8 nanocrystals exhibit n-type semiconductor characteristics with a transition band gap of ≈1.8 eV. Their flatband potential is located at -0.56 V versus the standard hydrogen electrode at pH 6.0 and is shifted cathodically by 0.75 V in solutions with pH values greater than 12.0. Under optimized conditions, the 1.0 wt % Ru-loaded CuGa2In3S8 photocatalyst exhibits a photocatalytic H2 evolution response up to 700 nm and an apparent quantum efficiency of (6.9±0.5) % at 560 nm. These results indicate clearly that QMS nanocrystals have great potential as nano-photocatalysts for solar H2 production.

Eleven nanometer alignment precision of a plasmonic nanoantenna with a self-assembled GaAs quantum dot.

Plasmonics offers the opportunity of tailoring the interaction of light with single quantum emitters. However, the strong field localization of plasmons requires spatial fabrication accuracy far beyond what is required for other nanophotonic technologies. Furthermore, this accuracy has to be achieved across different fabrication processes to combine quantum emitters and plasmonics. We demonstrate a solution to this critical problem by controlled positioning of plasmonic nanoantennas with an accuracy of 11 nm next to single self-assembled GaAs semiconductor quantum dots, whose position can be determined with nanometer precision. These dots do not suffer from blinking or bleaching or from random orientation of the transition dipole moment as colloidal nanocrystals do. Our method introduces flexible fabrication of arbitrary nanostructures coupled to single-photon sources in a controllable and scalable fashion.

Laser-induced oxidation kinetics of bismuth surface microdroplets on GaAsBi studied in situ by Raman microprobe analysis.

We report the cw-laser-induced oxidation of molecular-beam-epitaxy grown GaAsBi bismuth surface microdroplets investigated in situ by micro-Raman spectroscopy under ambient conditions as a function of irradiation power and time. Our results reveal the surface droplets are high-purity crystalline bismuth and the resultant Bi2O3 transformation to be ß-phase and stable at room temperature. A detailed Raman study of Bi microdroplet oxidation kinetics yields insights into the laser-induced oxidation process and offers useful real-time diagnostics. The temporal evolution of new ß-Bi2O3 Raman modes is shown to be well described by Johnson-Mehl-Avrami-Kolmogorov kinetic transformation theory and while this study limits itself to the laser-induced oxidation of GaAsBi bismuth surface droplets, the results will find application within the wider context of bismuth laser-induced oxidation and direct Raman laser processing.

Monolithic integration of GaN-based light-emitting diodes and metal-oxide-semiconductor field-effect transistors.

In this study, we report a novel monolithically integrated GaN-based light-emitting diode (LED) with metal-oxide-semiconductor field-effect transistor (MOSFET). Without additionally introducing complicated epitaxial structures for transistors, the MOSFET is directly fabricated on the exposed n-type GaN layer of the LED after dry etching, and serially connected to the LED through standard semiconductor-manufacturing technologies. Such monolithically integrated LED/MOSFET device is able to circumvent undesirable issues that might be faced by other kinds of integration schemes by growing a transistor on an LED or vice versa. For the performances of resulting device, our monolithically integrated LED/MOSFET device exhibits good characteristics in the modulation of gate voltage and good capability of driving injected current, which are essential for the important applications such as smart lighting, interconnection, and optical communication.

Negative gate bias and light illumination-induced hump in amorphous InGaZnO thin film transistor.

While observing the transfer characteristics of a-IGZO TFTs, it was noticed that a hump occurred in the subthreshold regime after light and bias stress. This study analyzes the mechanism of the hump occurrence. It was determined that hump characteristics were related with parasitic TFTs which formed at the peripheral edges parallel with the channel direction. It seems that the negative shift of the transfer characteristics of parasitic TFTs was larger than that of the main TFT under light and bias stress. Therefore, the difference in the negative shift between the main TFT and the parasitic TFT was the origin of the hump occurrence. We investigated the instability of a-IGZO TFTs under negative gate bias with light illumination for various channel structures in order to verify the above mechanism.

Phonon-drag magnetothermopower in Rashba spin-split two-dimensional electron systems.

We study the phonon-drag contribution to the thermoelectric power in a quasi-two-dimensional electron system confined in GaAs/AlGaAs heterostructure in the presence of both Rashba spin-orbit interaction and perpendicular magnetic field at very low temperature. It is observed that the peaks in the phonon-drag thermopower split into two when the Rashba spin-orbit coupling constant is strong. This splitting is a direct consequence of the Rashba spin-orbit interaction. We show the dependence of phonon-drag thermopower on both magnetic field and temperature numerically. A power-law dependence of phonon-drag magnetothermopower on the temperature in the Bloch-Gruneisen regime is found. We also extract the exponent of the temperature dependence of phonon-drag thermopower for different parameters like electron density, magnetic field, and the spin-orbit coupling constant.

Double-layer anti-reflection coating containing a nanoporous anodic aluminum oxide layer for GaAs solar cells.

Multilayer anti-reflection (AR) coatings can be used to improve the efficiency of Gallium Arsenide (GaAs) solar cells. We propose an alternate method to obtain optical thin films with specified refractive indices, which is using a self-assembled nanoporous anodic aluminum oxide (AAO) template as an optical thin film whose effective refractive index can be tuned by pore-widening. Different kinds of double-layer AR coatings each containing an AAO layer were designed and investigated by finite difference time domain (FDTD) method. We demonstrate that a λ /4n - λ /4n AR coating consisting of a TiO(2) layer and an AAO layer whose effective refractive index is 1.32 realizes a 96.8% light absorption efficiency of the GaAs solar cell under AM1.5 solar spectrum (400 nm-860 nm). We also have concluded some design principles of the double-layer AR coating containing an AAO layer for GaAs solar cells.

Integrated autocorrelator based on superconducting nanowires.

We demonstrate an integrated autocorrelator based on two superconducting single-photon detectors patterned on top of a GaAs ridge waveguide. This device enables the on-chip measurement of the second-order intensity correlation function g(2)(τ). A polarization-independent device quantum efficiency in the 1% range is reported, with a timing jitter of 88 ps at 1300 nm. g(2)(τ) measurements of continuous-wave and pulsed laser excitations are demonstrated with no measurable crosstalk within our measurement accuracy.

Effect of non-vacuum thermal annealing on high indium content InGaN films deposited by pulsed laser deposition.

InGaN films with 33% and 60% indium contents were deposited by pulsed laser deposition (PLD) at a low growth temperature of 300 °C. The films were then annealed at 500-800 °C in the non-vacuum furnace for 15 min with an addition of N(2) atmosphere. X-ray diffraction results indicate that the indium contents in these two films were raised to 41% and 63%, respectively, after annealing in furnace. In(2)O(3) phase was formed on InGaN surface during the annealing process, which can be clearly observed by the measurements of auger electron spectroscopy, transmission electron microscopy and x-ray photoelectron spectroscopy. Due to the obstruction of indium out-diffusion by forming In(2)O(3) on surface, it leads to the efficient increment in indium content of InGaN layer. In addition, the surface roughness was greatly improved by removing In(2)O(3) with the etching treatment in HCl solution. Micro-photoluminescence measurement was performed to analyze the emission property of InGaN layer. For the as-grown InGaN with 33% indium content, the emission wavelength was gradually shifted from 552 to 618 nm with increasing the annealing temperature to 800 °C. It reveals the InGaN films have high potential in optoelectronic applications.

Improved performance of GaN-based vertical light emitting diodes with conducting and transparent single-walled carbon nanotube networks.

In this study, reduced forward voltage and improved light output power of GaN-based vertical light-emitting diodes (VLEDs) incorporating single-walled carbon nanotube (SWNT)-networks is reported. The SWNT-networks were directly formed on a roughened (textured) n-GaN surface via a solution-processed dip-coating method. The surface-roughened VLEDs with the proposed SWNT-networks had a forward voltage of 3.84 V at 350 mA, lower than that of the surface-roughened VLEDs, and exhibited an increase in light output power by 12.9% at 350 mA compared to the surface-roughened VLEDs. These improved electrical and optical properties could be attributed to the SWNT-networks put on the roughened n-GaN surface, which increase the lateral current transport and create scattering of light through the formation of additional roughness.

Electronic properties of GaAs, InAs and InP nanowires studied by terahertz spectroscopy.

We have performed a comparative study of ultrafast charge carrier dynamics in a range of III-V nanowires using optical pump-terahertz probe spectroscopy. This versatile technique allows measurement of important parameters for device applications, including carrier lifetimes, surface recombination velocities, carrier mobilities and donor doping levels. GaAs, InAs and InP nanowires of varying diameters were measured. For all samples, the electronic response was dominated by a pronounced surface plasmon mode. Of the three nanowire materials, InAs nanowires exhibited the highest electron mobilities of 6000 cm² V⁻¹ s⁻¹, which highlights their potential for high mobility applications, such as field effect transistors. InP nanowires exhibited the longest carrier lifetimes and the lowest surface recombination velocity of 170 cm s⁻¹. This very low surface recombination velocity makes InP nanowires suitable for applications where carrier lifetime is crucial, such as in photovoltaics. In contrast, the carrier lifetimes in GaAs nanowires were extremely short, of the order of picoseconds, due to the high surface recombination velocity, which was measured as 5.4 × 105 cm s⁻¹. These findings will assist in the choice of nanowires for different applications, and identify the challenges in producing nanowires suitable for future electronic and optoelectronic devices.

Large area photoconductive terahertz emitter for 1.55 µm excitation based on an InGaAs heterostructure.

We present scalable large area terahertz (THz) emitters based on a nanoscale multilayer InGaAs/InAlAs heterostructure and a microstructured electrode pattern. The emitters are designed for pump lasers working at the telecommunication wavelength of 1.55 µm. Electric THz fields of more than 2.5 V cm⁻¹ are reached with moderate pump powers of 80 mW, the corresponding spectrum extends up to 3 THz. The saturation characteristics have been investigated for different pump laser spot sizes. For small pump powers of less than 50 mW the emitted THz field is nearly independent of the spot size, for higher pump powers and small spot sizes a clear saturation of the generated THz pulse can be observed. Hence the use of scalable emitters is especially promising for high power fibre laser systems. The spectral content of the generated radiation is nearly independent of the parameters spot size, pump power, and bias voltage, which allows for stable operation in spectroscopic applications.

Photostimulated near-infrared persistent luminescence as a new optical read-out from Cr³âº-doped LiGa5O8.

In conventional photostimulable storage phosphors, the optical information written by x-ray or ultraviolet irradiation is usually read out as a visible photostimulated luminescence (PSL) signal under the stimulation of a low-energy light with appropriate wavelength. Unlike the transient PSL, here we report a new optical read-out form, photostimulated persistent luminescence (PSPL) in the near-infrared (NIR), from a Cr(3+)-doped LiGa5O8 NIR persistent phosphor exhibiting a super-long NIR persistent luminescence of more than 1,000 h. An intense PSPL signal peaking at 716 nm can be repeatedly obtained in a period of more than 1,000 h when an ultraviolet-light (250-360 nm) pre-irradiated LiGa5O8:Cr(3+) phosphor is repeatedly stimulated with a visible light or a NIR light. The LiGa5O8:Cr(3+) phosphor has promising applications in optical information storage, night-vision surveillance, and in vivo bio-imaging.

InGaAsP-based uni-travelling carrier photodiode structure grown by solid source molecular beam epitaxy.

We report the first InGaAsP-based uni-travelling carrier photodiode structure grown by Solid Source Molecular Beam Epitaxy; the material contains layers of InGaAsP as thick as 300 nm and a 120 nm thick InGaAs absorber. Large area vertically illuminated test devices have been fabricated and characterised; the devices exhibited 0.1 A/W responsivity at 1550 nm, 12.5 GHz -3 dB bandwidth and -5.8 dBm output power at 10 GHz for a photocurrent of 4.8 mA. The use of Solid Source Molecular Beam Epitaxy enables the major issue associated with the unintentional diffusion of zinc in Metal Organic Vapour Phase Epitaxy to be overcome and gives the benefit of the superior control provided by MBE growth techniques without the costs and the risks of handling toxic gases of Gas Source Molecular Beam Epitaxy.

Regrowth-free high-gain InGaAsP/InP active-passive platform via ion implantation.

We demonstrate a regrowth-free material platform to create monolithic InGaAsP/InP photonic integrated circuits (PICs) with high-gain active and low-loss passive sections via a PL detuning of >135 nm. We show 2.5 µm wide by 400 µm long semiconductor optical amplifiers with >40 dB/mm gain at 1570 nm, and passive waveguide losses <2.3 dB/mm. The bandgap in the passive section is detuned using low-energy 190 keV channelized phosphorous implantation and subsequent rapid thermal annealing to achieve impurity-induced quantum well intermixing (QWI). The PL wavelengths in the active and passive sections are 1553 and 1417 nm, respectively. Lasing wavelengths for 500 µm Fabry-Perot lasers are 1567 and 1453 nm, respectively.

Enhancement of ultraviolet detecting by coupling the photoconductive behavior of GaN nanowires and p-n junction.

The giant improvement of ultraviolet response behavior of a conventional GaN p-n film structured detector by the incorporation of slanted GaN nanowires is reported. The GaN nanowires/p-n film structure shows great photoresponse performance, exhibiting a short response time <0.1 s and a high sensitivity, being stable and reproducible with an on/off current contrast ratio as high as 1800 at zero bias under 365 nm ultraviolet light irradiation. Via carefully analyzing the experiment result and the band diagram of the device, the enhancement can be predominantly attributed to the photogenerated electrons in the slanted GaN nanowires.

An electrically-driven GaAs nanowire surface plasmon source.

Over the past decade, the properties of plasmonic waveguides have extensively been studied as key elements in important applications that include biosensors, optical communication systems, quantum plasmonics, plasmonic logic, and quantum-cascade lasers. Whereas their guiding properties are by now fairly well-understood, practical implementation in chipscale systems is hampered by the lack of convenient electrical excitation schemes. Recently, a variety of surface plasmon lasers have been realized, but they have not yet been waveguide-coupled. Planar incoherent plasmonic sources have recently been coupled to plasmonic guides but routing of plasmonic signals requires coupling to linear waveguides. Here, we present an experimental demonstration of electrically driven GaAs nanowire light sources integrated with plasmonic nanostrip waveguides with a physical cross-section of 0.08λ(2). The excitation and waveguiding of surface plasmon-polaritons (SPPs) is experimentally demonstrated and analyzed with the help of full-field electromagnetic simulations. Splitting and routing of the electrically generated SPP signals around 90° bends are also shown. The realization of integrated plasmon sources greatly increases the applicability range of plasmonic waveguides and routing elements.

Ferromagnetic GaAs structures with single Mn delta-layer fabricated using laser deposition.

The new technique combining metal-organic chemical vapor epitaxy with laser ablation of solid targets was used for fabrication of ferromagnetic GaAs structures with single Mn delta-doped layer. The structures demonstrated anomalous Hall effect, planar Hall effect, negative and anisotropic magnetoresistance in temperature range of 10-35 K. In GaAs structures with only single Mn delta-layer (without additional 2D hole gas channel or quantum well) ferromagnetism was observed for the first time.